How To Build A Motorcycle Lift

How To Build A Motorcycle Lift. I built a stand/lift for my motorcycle this morning. Click here to see the rampage install and operating manuals plus a three part video install guide we produced!

Motorcycle work table plans Wood Working Projects from workprojectt.blogspot.com

Measure and cut to size. I would like to get my bike up in. The handle should lower to the ground and the bike will support it.

As Seen In Drawing 2 And 3.

Kick the flap in so it forms the rest of the box shape and holds the top from tilting. I built a stand/lift for my motorcycle this morning. I made this motorlift with the plans i got from a friend.

It Can Easily Lift My Motorbike Which Ways About.

Take 2 pieces clamp them together and cut out 3 notches 1/2'' wide and 1'' longer then 1/2 way down the sheets of wood! Drill through the mark you just made, using the paddle bit. Before you commence the building, you need to make space in your garage to fit your lift there.

This Style Of Stand Requires You To Lift The Rear Of The Bike, Placing The Weight Onto Your Thigh, Then Hucking The Bike Over The Stand, Placing The Center Of The Frame On The Center.

Now that you’ve gathered all your supplies, the first step of building a motorcycle lift table is to clear the area to create enough space to work on. So, i can't even afford to buy the 299.99 harbfreight lift, at least not if i wanna buy parts and spend money on my build. Click here to see the rampage install and operating manuals plus a three part video install guide we produced!

The End Piece Has A Tounge On It That Slides In The Groove On The Inner Sleeve.

The diy motor lift provides a solution for raising and lowering a motorcycle off the ground. This article will outline the details about how to build a motorcycle lift. You should also measure where your bike will be.

Then, Begin With Marking On An 8 Inch Wide Side Of A 4 X 8 X 3 Inch Piece Of Wood.

Take one of the 2 remaining. Ideal for use in garages, carports, and driveways, the lift is designed to make working underneath. The plans are sized specifically for a 1995 to 2000 kdx, 10.5 tall when in the lowered position.

Leave a Reply

Your email address will not be published.