How To Light A Pilot Light On A Trane Furnace. If your furnace pilot light goes out, it doesn't always mean a costly repair. If so, look up your furnace model and.
Next, turn your pilot light to the “off” position. Turn the pilot light off. How to light a pilot light on a trane furnace.
Table of Contents
The Pressure Switch Is Not Making Contact And Allowing Electricity To The Ignitor.
Locate the switch or knob that displays three settings (on, pilot, off). When the pilot light is hot enough and working correctly, the main gas valve in the pilot assembly is kept. As we mentioned earlier, older model furnaces burn visible blue flames.
Once The Gas Has Had Time To Dissipate, Turn The Knob To Pilot. Then, Hold Down The Reset Button And Bring The Flame Of A Long Lighter Close To The Pilot Light Opening.
If your furnace pilot light goes out, it doesn't always mean a costly repair. Lennox elite series furnace you. Follow one of the two smaller ones (the.
There Should Be A Label Printed On Your Furnace With Instructions, But It Could Be Difficult To Read.
Most furnaces, including gas furnaces, use pilot lights. Access the furnace controls by opening the metal door at the bottom front side of the trane furnace. The pilot light should light, but keep holding the small button down for about a minute.
Press The Gas Control Knob Down All The Way And Hold It In The Depressed Position.
The next step is to look for the pilot light dial. Turn the control knob to “pilot”. Access the furnace controls by opening the metal door.
If You Have No Igniter, Move The Match Or Barbecue Lighter Flame To The End Of The Pilot Tube;
The pilot light in a gas furnace is a continuously burning flame that ignites the burners. How to relight pilot light on trane furnace trane technologies inc. After locating the reset button, it’s time to turn the knob of the furnace to pilot.